33,887,000 vnđ
(Giá chưa VAT)This Product Guide describes the models of the x3630 M4 with Intel Xeon processor E5-2400 product family. For x3630 M4 models with Intel Xeon processor E5-2400 v2 product family
Tặng Antivirus bản quyền 1 năm + Tặng voucher trị giá 500,000 VND- 2,000,000 VND cho dịch vụ thuê chỗ đặt máy chủ (Co-location) + Free chi phí setup + 1 triệu Bang quảng cáo trên mạng xã hội Việt (www.bang.vn )
Standard specifications
The following table lists the standard specifications.
Table 1. Standard specifications
Components | Specification |
Form factor | 2U rack. |
Processor | Up to two Intel Xeon processor E5-2400 product family processors with eight cores (up to 2.3 GHz), six cores (up to 2.4 GHz) or four cores (up to 2.2 GHz), one QPI link up to 8.0 GTps, up to 1600 MHz memory speed, up to 20 MB L3 cache; or one Intel Xeon processor E5-1400 product family processor with four cores up to 2.8 GHz, 10 MB L3 cache, and 1333 MHz memory speed (CTO only); or one Intel Pentium processor 1400 product family processor with two cores up to 2.8 GHz, 5 MB L3 cache, and 1066 MHz memory speed (CTO only). |
Chipset | Intel C600 series. |
Memory | Up to 12 DIMM sockets (six DIMMs per processor). LRDIMMs, RDIMMs, and UDIMMs are supported, but memory types cannot be intermixed. DIMM speeds are up to 1600 MHz. |
Memory maximums | With LRDIMMs: Up to 384 GB with 12x 32 GB RDIMMs and two processors With RDIMMs: Up to 192 GB with 12x 16 GB RDIMMs and two processors With UDIMMs: Up to 48 GB with 12x 4 GB UDIMMs and two processors |
Memory protection | ECC, Chipkill, memory mirroring, and memory rank sparing. |
Disk drive bays | Up to eight 3.5-inch SATA simple-swap drive bays, up to eight 3.5-inch SAS/SATA hot-swap drive bays, or up to fourteen 3.5-inch SAS/SATA hot-swap drive bays. |
Maximum internal storage | Up to 56 TB with 4 TB 3.5-inch NL SAS/SATA HS HDDs, up to 32 TB with 4 TB 3.5-inch SATA SS HDDs, or up to 11.2 TB with 800 GB 3.5-inch SATA HS SSDs. An intermix of SAS/SATA is supported. |
RAID support | RAID 0 and 1 with C105. RAID 0, 1, and 10 with M1115 or M5110. Upgrades to RAID 5 and 50 are available for M1115. Upgrades to RAID 5 and 50 are available for M5110 (zero-cache; 512 MB battery-backed cache; 512 MB or 1 GB flash-backed cache). Upgrade to RAID 6 or 60 is available for M5110 with caches. |
Optical drive bays | One, for models with up to eight 3.5-inch drive bays. Support for optional DVD-ROM or multiburner. |
Tape drive bays | Optional, for models with up to eight 3.5-inch drive bays. Tape Enablement Kit is required to support the internal tape drive. Support for optional DDS5 or DDS6 USB tape drives is available. |
Network interfaces | Up to four integrated Gigabit Ethernet 1000BASE-T RJ-45 ports (two ports enabled, and an additional two ports require the optional software FoD upgrade to enable them). |
Ports | Two USB 2.0 and one DB-15 video (not available on storage-rich models) port on the front. Four USB 2.0, one DB-15 video, one DB-9 serial, and four RJ-45 GbE network ports on the rear. Two internal USB ports (one for embedded hypervisor, one for internal USB tape drive). |
Cooling | IBM Calibrated Vectored Cooling with three redundant non-hot-swap fans; each fan has two motors. |
Power supply | Up to two redundant hot-swap 550 W HE AC, 750 W HE AC, or 900 W HE AC power supplies (all AC power supplies are 80 PLUS Platinum certified), or up to two redundant hot-swap 750 W HE DC power supplies. |
Hot-swap parts | Hard drives (hot-swap models), power supplies. |
I/O expansion slots | Up to five slots in models with up to 12 drive bays, depending on the riser cards installed. The slots are as follows:
Up to three slots in models with 14 drive bays, depending on the riser cards installed. The slots are as follows:
|
Systems management | UEFI, IBM Integrated Management Module II (IMM2), Predictive Failure Analysis, light path diagnostics (basic standard, advanced optional), Automatic Server Restart, IBM Systems Director and IBM Systems Director Active Energy Manager, and IBM ServerGuide. Optional IMM Advanced FoD Upgrade for remote presence (graphics, keyboard and mouse, and virtual media). |
Security features | Power-on password, administrator's password, and Trusted Platform Module (TPM). |
Video | Matrox G200eR2 with 16 MB memory integrated into the IMM2. Maximum resolution is 1600x1200 at 75 Hz with 16 M colors. |
Operating systems supported | Microsoft Windows Server 2012 R2, 2012, 2008 R2 and 2008 (x64), Red Hat Enterprise Linux 5 and 6, SUSE Linux Enterprise Server 10 and 11, VMware ESX 4.1 and VMware ESXi 4.1 embedded hypervisor, and VMware vSphere (ESXi) 5.0, 5.1, and 5.5. |
Limited warranty | Three-year customer-replaceable unit and on-site limited warranty with 9x5/NBD. |
Service and support | Optional service upgrades (country-specific) are available through IBM ServicePac® offerings: 4-hour or 2-hour response time, 8 hours fix time, one-year or two-year warranty extension, remote technical support for IBM hardware and selected IBM and third-party (Microsoft, Linux, VMware) software. |
Dimensions | Height: 86 mm (3.4 in.), width: 447 mm (17.6 in.), depth: 749 mm (29.5 in.) |
Weight | Minimum configuration: 16.4 kg (36.2 lb), maximum: 28.2 kg (62.2 lb) |
The x3630 M4 servers are shipped with the following items:
Standard models
The following table lists the standard models.
Table 2. Standard models
MTM* | Intel Xeon processor† (2 maximum) |
Memory | RAID | Drive bays |
Drives | Onboard NIC (std/max) |
I/O slots (std/ max) |
Optical drive |
Power (std/ max) |
Models announced May 2012 | |||||||||
7158-A2x | 1x E5-2403 4C 1.8GHz 10MB 1066MHz 80W |
1x 4 GB 1333 MHz§ |
C105 | 4x 3.5" SS / 4 |
Open bay | 2x GbE / 4 | 2 / 5 | Optional | 1x 550 W HS / 2 |
7158-A4x | 1x E5-2403 4C 1.8GHz 10MB 1066MHz 80W |
1x 4 GB 1333 MHz§ |
C105 | 8x 3.5" SS / 8 |
Open bay | 2x GbE / 4 | 2 / 5 | Optional | 1x 550 W HS / 2 |
7158-B2x | 1x E5-2407 4C 2.2GHz 10MB 1066MHz 80W |
1x 4 GB 1333 MHz§ |
C105 | 8x 3.5" HS / 8 |
Open bay | 2x GbE / 4 | 2 / 5 | Optional | 1x 550 W HS / 2 |
7158-B4x | 1x E5-2407 4C 2.2GHz 10MB 1066MHz 80W |
1x 4 GB 1333 MHz§ |
M1115 | 12x 3.5" HS / 14 |
Open bay | 2x GbE / 4 | 5 / 5 | None | 1x 750 W HS / 2 |
7158-C2x | 1x E5-2420 6C 1.9GHz 15MB 1333MHz 95W |
1x 4 GB 1333 MHz |
M1115 | 8x 3.5" HS / 8 |
Open bay | 2x GbE / 4 | 5 / 5 | Optional | 1x 550 W HS / 2 |
7158-C4x‡ | 1x E5-2420 6C 1.9GHz 15MB 1333MHz 95W |
1x 8 GB 1333 MHz |
M5110 512 MB |
8x 3.5" HS / 8 |
1x 500 GB 7.2K SATA |
2x GbE / 4 | 5 / 5 | Multi- burner |
1x 550 W HS / 2 |
7158-C6x‡ | 1x E5-2420 6C 1.9GHz 15MB 1333MHz 95W |
1x 8 GB 1333 MHz |
M5110 512 MB |
12x 3.5" HS / 14 |
1x 500 GB 7.2K SATA |
2x GbE / 4 | 5 / 5 | None | 1x 750 W HS / 2 |
7158-D2x | 1x E5-2430 6C 2.2GHz 15MB 1333MHz 95W |
1x 4 GB 1333 MHz |
M5110 512 MB |
12x 3.5" HS / 14 |
Open bay | 2x GbE / 4 | 5 / 5 | None | 1x 750 W HS / 2 |
7158-F2x | 1x E5-2440 6C 2.4GHz 15MB 1333MHz 95W |
1x 4 GB 1333 MHz |
M5110 512 MB (f) |
12x 3.5" HS / 14 |
Open bay | 2x GbE / 4 | 5 / 5 | None | 1x 750 W HS / 2 |
7158-F4x | 1x E5-2440 6C 2.4GHz 15MB 1333MHz 95W |
1x 4 GB 1333 MHz |
M5110 512 MB (f) |
8x 3.5" HS / 8 |
Open bay | 2x GbE / 4 | 5 / 5 | Optional | 1x 550 W HS / 2 |
7158-G2x | 1x E5-2450 8C 2.1GHz 20MB 1600MHz 95W |
1x 4 GB 1333 MHz§ |
M5110 1 GB (f) |
8x 3.5" HS / 8 |
Open bay | 2x GbE / 4 | 5 / 5 | Optional | 1x 550 W HS / 2 |
7158-H2x | 1x E5-2470 8C 2.3GHz 20MB 1600MHz 95W |
1x 8 GB 1333 MHz§ |
M5110 1 GB (f) |
12x 3.5" HS / 14 |
Open bay | 2x GbE / 4 | 5 / 5 | None | 1x 750 W HS / 2 |
7158-J2x | 1x E5-2450L 8C 1.8GHz 20MB 1600MHz 70W |
1x 4 GB 1333 MHz§ |
M5110 1 GB (f) |
12x 3.5" HS / 14 |
Open bay | 2x GbE / 4 | 5 / 5 | None | 1x 750 W HS / 2 |
* x in the Machine Type Model (MTM) represents a country-specific letter (for example, the EMEA MTM is 7158-A1G, and the US MTM is 7158-A1U). Ask your local IBM representative for specifics.
† Processor detail: Processor quantity and model, number of cores, core speed, L3 cache, memory speed, TDP.
§ For models A2x, A4x, B2x, and B4x, the standard DIMM is rated at 1333 MHz, but operates at up to 1066 MHz to match the processor memory speed. Conversely, for models G2x, H2x, and J2x, the processor memory speed is rated at 1600 MHz, but operates at up to 1333 MHz to match the rated speed of the installed DIMM. Actual memory speed maximums depend on several factors, as described in "Memory options".
‡ Models C4x and C6x include Windows Storage Server 2008 R2 Standard preload.
(f) The ServeRAID M5110 RAID controller in this model includes flash-backed cache.
Refer to the "Specifications" section for information about the standard features of the server.
Express models
The following table lists the express models.
Table 3. Express models
MTM* | Intel Xeon processor† (2 maximum) |
Memory | RAID | Drive bays |
Drives | Onboard NIC (std/max) |
I/O slots (std/ max) |
Optical drive |
Power (std/ max) |
Central and Eastern Europe (CEE) | |||||||||
7158-E1G | 1x E5-2407 4C 2.2GHz 10MB 1066MHz 80W |
1x 4 GB 1333 MHz§ |
M1115 | 8x 3.5" HS / 8 |
Open bay | 2x GbE / 4 | 5 / 5 | Multi- burner |
1x 550 W HS / 2 |
7158-E2G# | 1x E5-2420 6C 1.9GHz 15MB 1333MHz 95W |
1x 8 GB 1333 MHz |
M5110 | 8x 3.5" HS / 8 |
Open bay | 2x GbE / 4 | 5 / 5 | Multi- burner |
1x 550 W HS / 2 |
7158-E3G‡ | 1x E5-2430 6C 2.2GHz 15MB 1333MHz 95W |
1x 8 GB 1333 MHz |
M5110 512 MB (f) |
12x 3.5" HS / 14 |
2x 500 GB 7.2K SATA |
2x GbE / 4 | 5 / 5 | None | 1x 750 W HS / 2 |
7158-E4G | 1x E5-2420 6C 1.9GHz 15MB 1333MHz 95W |
1x 8 GB 1333 MHz |
M5110 | 8x 3.5" HS / 8 |
1x 500 GB 7.2K SATA |
2x GbE / 4 | 5 / 5 | Multi- burner |
1x 550 W HS / 2 |
Europe (excluding CEE) | |||||||||
7158-E1G | 1x E5-2407 4C 2.2GHz 10MB 1066MHz 80W |
1x 4 GB 1333 MHz§ |
M1115 | 8x 3.5" HS / 8 |
Open bay | 2x GbE / 4 | 5 / 5 | Multi- burner |
1x 550 W HS / 2 |
7158-E2G | 1x E5-2420 6C 1.9GHz 15MB 1333MHz 95W |
1x 8 GB 1333 MHz |
M5110 | 8x 3.5" HS / 8 |
Open bay | 2x GbE / 4 | 5 / 5 | Multi- burner |
1x 550 W HS / 2 |
7158-E3G | 1x E5-2430 6C 2.2GHz 15MB 1333MHz 95W |
1x 8 GB 1333 MHz |
M5110 512 MB (f) |
12x 3.5" HS / 14 |
2x 500 GB 7.2K SATA |
2x GbE / 4 | 5 / 5 | None | 1x 750 W HS / 2 |
Middle East, Africa | |||||||||
7158-E1G | 1x E5-2407 4C 2.2GHz 10MB 1066MHz 80W |
1x 4 GB 1333 MHz§ |
M1115 | 8x 3.5" HS / 8 |
Open bay | 2x GbE / 4 | 5 / 5 | Multi- burner |
1x 550 W HS / 2 |
7158-E3G | 1x E5-2430 6C 2.2GHz 15MB 1333MHz 95W |
1x 8 GB 1333 MHz |
M5110 512 MB (f) |
12x 3.5" HS / 14 |
2x 500 GB 7.2K SATA |
2x GbE / 4 | 5 / 5 | None | 1x 750 W HS / 2 |
7158-E4G | 1x E5-2420 6C 1.9GHz 15MB 1333MHz 95W |
1x 8 GB 1333 MHz |
M5110 | 8x 3.5" HS / 8 |
1x 500 GB 7.2K SATA |
2x GbE / 4 | 5 / 5 | Multi- burner |
1x 550 W HS / 2 |
United States, Latin America, Canada | |||||||||
7158-EAU | 1x E5-2407 4C 2.2GHz 10MB 1066MHz 80W |
1x 8 GB 1333 MHz§ |
M5110 | 8x 3.5" HS / 8 |
Open bay | 2x GbE / 4 | 5 / 5 | Multi- burner |
1x 550 W HS / 2 |
7158-EBU | 1x E5-2420 6C 1.9GHz 15MB 1333MHz 95W |
1x 8 GB 1333 MHz |
M5110 512 MB (f) |
8x 3.5" HS / 8 |
Open bay | 2x GbE / 4 | 5 / 5 | Multi- burner |
1x 550 W HS / 2 |
7158-ECU | 1x E5-2440 6C 2.4GHz 15MB 1333MHz 95W |
1x 8 GB 1333 MHz |
M5110 1 GB (f) |
8x 3.5" HS / 8 |
Open bay | 2x GbE / 4 | 5 / 5 | Multi- burner |
1x 550 W HS / 2 |
* MTM = Machine Type Model
† Processor detail: Processor quantity and model, number of cores, core speed, L3 cache, memory speed, TDP.
§ For models E1G and EAU, the standard DIMM is rated at 1333 MHz, but operates at up to 1066 MHz to match the processor memory speed. Actual memory speed maximums depend on several factors, as described in "Memory options".
# This model is available only in Russia/Commonwealth of Independent States (R/CIS).
‡ This model is not available in Russia/Commonwealth of Independent States (R/CIS).
(f) The ServeRAID M5110 RAID controller in this model includes flash-backed cache.
Processor options
The x3630 M4 (E5-2400) supports the processor options listed in the following table. The server supports up to two Intel Xeon processor E5-2400 product family processors, one Intel Xeon processor E5-1410, one Intel Pentium processor 1403, or one Intel Pentium processor 1407. This table shows which server models have each processor standard. If there is no corresponding where used model for a particular processor, then this processor is only available through CTO.
Table 4. Processor options
Part number | Description | Standard models where used |
Single or dual processor support: Intel Xeon processor E5-2400 product family | ||
90Y6367 | Intel Xeon Processor E5-2403 4C 1.8GHz 10MB Cache 1066MHz 80W | A2x, A4x |
90Y6365 | Intel Xeon Processor E5-2407 4C 2.2GHz 10MB Cache 1066MHz 80W | B2x, B4x |
90Y6364 | Intel Xeon Processor E5-2420 6C 1.9GHz 15MB Cache 1333MHz 95W | C2x, C4x, C6x |
90Y6363 | Intel Xeon Processor E5-2430 6C 2.2GHz 15MB Cache 1333MHz 95W | D2x |
90Y6384 | Intel Xeon Processor E5-2430L 6C 2.0GHz 15MB Cache 1333MHz 60W | - |
90Y6362 | Intel Xeon Processor E5-2440 6C 2.4GHz 15MB Cache 1333MHz 95W | F2x, F4x |
90Y6361 | Intel Xeon Processor E5-2450 8C 2.1GHz 20MB Cache 1600MHz 95W | G2x |
90Y6368 | Intel Xeon Processor E5-2450L 8C 1.8GHz 20MB Cache 1600MHz 70W | J2x |
90Y6356 | Intel Xeon Processor E5-2470 8C 2.3GHz 20MB Cache 1600MHz 95W | H2x |
Single processor support only: Intel Xeon processor E5-1410 and Intel Pentium processor 1400 product family | ||
None* | Intel Pentium Processor 1403 2C 2.6GHz 5MB cache 1066MHz 80W | - |
None* | Intel Pentium Processor 1407 2C 2.8GHz 5MB cache 1066MHz 80W | - |
None* | Intel Xeon Processor E5-1410 4C 2.8GHz 10MB Cache 1333MHz 80W | - |
* These processors only support single processor configurations and are available only through CTO or special bid.
Memory options
IBM DDR3 memory is compatibility tested and tuned for optimal System x performance and throughput. IBM memory specifications are integrated into the light path diagnostics for immediate system performance feedback and optimum system uptime. From a service and support standpoint, IBM memory automatically assumes the IBM system warranty, and IBM provides service and support worldwide.
The x3630 M4 (E5-2400) supports DDR3 memory. The server supports up to six DIMMs when one processor is installed, and up to 12 DIMMs when two processors are installed. Each processor has three memory channels, and there are two DIMMs per channel. The following rules apply when selecting the memory configuration:
The following memory protection technologies are supported:
Chipkill works only in independent channel mode (the default is operational mode) and supports only x4-based memory DIMMs.
If memory mirroring is used, then DIMMs must be installed in pairs (a minimum of one pair per each processor, and a maximum of two pairs per processor), and both DIMMs in a pair must be identical in type and size.
If memory rank sparing is used, then two single-rank or dual-rank DIMMs must be installed per populated channel (the DIMMs do not need to be identical). In rank sparing mode, one rank of a DIMM in each populated channel is reserved as spare memory. The size of a rank varies depending on the DIMMs installed.
Chipkill, memory mirroring, and memory rank sparing modes are mutually exclusive. Only one operational memory mode can be enabled on a server, and it is a system-wide setting.
The following table shows the characteristics of the supported DIMMs. Table cells highlighted with a gray background indicate when the combination of DIMM voltage and the number of DIMMs per channel still allows the DIMMs to operate at a rated speed.
Table 5. Maximum memory speeds (Part 1: RDIMMs)
DIMM type
Specification |
RDIMM | ||||||
Rank | Single rank | Dual rank | Quad rank | ||||
Rated speed | 1333 MHz | 1600 MHz | 1333 MHz | 1600 MHz | 1066 MHz | ||
Rated voltage | 1.35 V | 1.5 V | 1.35 V | 1.5 V | 1.35 V | ||
Operating voltage | 1.35 V | 1.5 V | 1.5 V | 1.35 V | 1.5 V | 1.5 V | 1.35 V |
Max quantity* | 12 | 12 | 12 | 12 | 12 | 12 | 12 |
Largest DIMM | 4 GB | 4 GB | 4 GB | 16 GB | 16 GB | 8 GB | 8 GB |
Max memory capacity | 48 GB | 48 GB | 48 GB | 192 GB | 192 GB | 96 GB | 96 GB |
Max memory at rated speed | 48 GB | 48 GB | 48 GB | 192 GB | 192 GB | 96 GB | NS** |
Maximum operating speed (MHz) | |||||||
1 DIMM per channel | 1333 MHz | 1333 MHz | 1600 MHz | 1333 MHz | 1333 MHz | 1600 MHz | 800 MHz |
2 DIMMs per channel | 1333 MHz | 1333 MHz | 1600 MHz | 1333 MHz | 1333 MHz | 1600 MHz | 800 MHz |
* Maximum quantity supported is shown for two processors installed. When one processor is installed, the maximum quantity supported is a half of what is shown.
** Rated speed is not supported. Memory DIMMs always operate at speeds lower than rated.
Table 5. Maximum memory speeds (Part 2: UDIMMs and LRDIMMs)
DIMM type
Specification |
UDIMM | LRDIMM | ||
Rank | Dual rank | Quad rank | ||
Rated speed | 1333 MHz | 1333 MHz | ||
Rated voltage | 1.35 V | 1.35 V | ||
Operating voltage | 1.35 V | 1.5 V | 1.35 V | 1.5 V |
Max quantity* | 12 | 12 | 12 | 12 |
Largest DIMM | 4 GB | 4 GB | 32 GB | 32 GB |
Max memory capacity | 48 GB | 48 GB | 384 GB | 384 GB |
Max memory at rated speed | 24 GB | 24 GB | NS** | 192 GB |
Maximum operating speed (MHz) | ||||
1 DIMM per channel | 1333 MHz | 1333 MHz | 1066 MHz | 1333 MHz |
2 DIMMs per channel | 1066 MHz | 1066 MHz | 800 MHz | 1066 MHz |
* Maximum quantity supported is shown for two processors installed. When one processor is installed, the maximum quantity supported is a half of what is shown.
** Rated speed is not supported. Memory DIMMs always operate at speeds lower than rated.
The following table lists the memory options available for the x3630 M4 server.
Table 6. Memory options
Part number | Feature code | Description | Maximum supported |
Standard models where used |
UDIMMs | ||||
49Y1404 | 8648 | 4GB (1x4GB, 2Rx8, 1.35V) PC3L-10600 CL9 ECC 1333MHz LP UDIMM | 12 (6 per processor) | - |
RDIMMs | ||||
49Y1405 | 8940 | 2GB (1x2GB, 1Rx8, 1.35V) PC3L-10600 CL9 ECC DDR3 1333MHz LP RDIMM | 12 (6 per processor) | - |
49Y1406 | 8941 | 4GB (1x4GB, 1Rx4, 1.35V) PC3L-10600 CL9 ECC DDR3 1333MHz LP RDIMM | 12 (6 per processor) | A2x, A4x, B2x, B4x, C2x, D2x, F2x, F4x, G2x, J2x |
49Y1559 | A28Z | 4GB (1x4GB, 1Rx4, 1.5V) PC3-12800 CL11 ECC DDR3 1600MHz LP RDIMM | 12 (6 per processor) | - |
49Y1407 | 8942 | 4GB (1x4GB, 2Rx8, 1.35V) PC3L-10600 CL9 ECC DDR3 1333MHz LP RDIMM | 12 (6 per processor) | - |
90Y3178 | A24L | 4GB (1x4GB, 2Rx8, 1.5V) PC3-12800 CL11 ECC DDR3 1600MHz LP RDIMM | 12 (6 per processor) | - |
49Y1397 | 8923 | 8GB (1x8GB, 2Rx4, 1.35V) PC3L-10600 CL9 ECC 1333MHz LP RDIMM | 12 (6 per processor) | C4x, C6x, H2x |
90Y3109 | A292 | 8GB (1x8GB, 2Rx4, 1.5V) PC3-12800 CL11 ECC DDR3 1600MHz LP RDIMM | 12 (6 per processor) | - |
49Y1399 | A14E | 8GB (1x8GB, 4Rx8, 1.35V) PC3L-8500 CL7 ECC DDR3 1066MHz LP RDIMM | 12 (6 per processor) | - |
49Y1563 | A1QT | 16GB (1x16GB, 2Rx4, 1.35V) PC3L-10600 CL9 ECC DDR3 1333MHz LP RDIMM | 12 (6 per processor) | - |
LRDIMMs | ||||
90Y3105 | A291 | 32GB (1x32GB, 4Rx4, 1.35V) PC3L-10600 CL9 ECC DDR3 1333MHz LP LRDIMM | 12 (6 per processor) | - |
Internal storage
The x3630 M4 server supports the following internal storage configurations:
In addition, four and eight bay models support the installation of either an internal optical drive or an internal tape drive.
The following figure shows some of these configurations.
Figure 7. Internal drive configurations
Standard models ship with four or eight 3.5-inch SATA simple-swap drive bays or eight 3.5-inch SAS/SATA hot-swap drive bays. Storage-rich models ship with twelve 3.5-inch SAS/SATA hot-swap drive bays, and they can also be upgraded to fourteen 3.5-inch hot-swap drive bay models with the optional rear HDD cage assembly. The following table shows the internal storage expansion options that are available.
Table 7. Internal storage expansion options
Part number | Feature code | Description | Maximum supported |
Standard models where used |
00D9034 | A1Z9 | 3.5" Hot Swap Cage Assembly, Rear, 2 x 3.5" | 1 | - |
00D9051 | A1ZL | x3630 M4 ODD Cage assembly | 1 | A2x, A4x, B2x, C2x, C4x, F4x, G2x |
90Y6370 | A1ZM | USB Tape Drive Cage assembling kit | 1 | - |
Option 00D9034 is used to upgrade standard (see Table 2) or custom (CTO or special bid) models with twelve 3.5-inch hot-swap drive bays to fourteen 3.5-inch hot-swap drive bays. This option contains the HDD backplane, drive cage, signal and data cables, and two 1U riser cards: PCIe Riser Card 1 (1 x8 FH/HL + 1 x8 LP Slots) and PCIe Riser Card 2 (1 x4 LP for Slotless RAID). These 1U riser cards replace the standard 2U riser cards used in the models with twelve 3.5-inch hot-swap drive bays, limiting the maximum number of I/O slots to three (for more information, see the I/O expansion options section).
Option 00D9051 upgrades any four or eight bay model with an internal optical drive bay (for DVD-ROM or Multiburner). This option includes one USB cable and one power cable. The optical drive is ordered separately. This option is mutually exclusive with 90Y6370, Tape Drive Cage assembly.
Note: Option 00D9051, x3630 M4 ODD Cage assembly comes standard with every four or eight bay standard model listed in Table 2.
Option 90Y6370 upgrades any four or eight bay model with an internal tape drive bay (for DDS5 or DDS6 tape drives). This option includes one USB cable and one power cable. The tape drive is ordered separately. This option is mutually exclusive with 90Y6370, ODD Cage assembly.
Controllers for internal storage
The following table lists the RAID controllers and the additional options used for the internal disk storage of the x3630 M4 server.
Table 8. RAID controllers for internal storage
Part number | Feature code | Description | Maximum supported |
Standard models where used |
None# | A2VA | ServeRAID C105 for IBM System x | 1 | A2x, A4x, B2x |
90Y4349§ | A2V7 | 8-pack SATA Enabler for IBM System x | 1 | A4x, B2x |
81Y4492 | A1XL | ServeRAID H1110 SAS/SATA Controller | 1 | - |
81Y4448 | A1MZ | ServeRAID M1115 SAS/SATA Controller | 1 | B4x, C2x |
81Y4542 | A1X1 | ServeRAID M1100 Series Zero Cache/RAID 5 Upgrade | 1 | - |
81Y4481 | A347 | ServeRAID M5110 SAS/SATA Controller | 1 | C4x, C6x, D2x, F2x, F4x, G2x, H2x, J2x |
81Y4544 | A1X2 | ServeRAID M5100 Series Zero Cache/RAID 5 Upgrade | 1 | - |
81Y4484 | A1J3 | ServeRAID M5100 Series 512MB Cache/RAID 5 Upgrade | 1 | C4x, C6x, D2x |
81Y4487 | A1J4 | ServeRAID M5100 Series 512MB Flash/RAID 5 Upgrade | 1 | F2x, F4x |
81Y4559 | A1WY | ServeRAID M5100 Series 1GB Flash/RAID 5 Upgrade | 1 | G2x, H2x, J2x |
81Y4508 | A22E | ServeRAID M5100 Series Battery Kit | 1* | - |
81Y4546 | A1X3 | ServeRAID M5100 Series RAID 6 Upgrade | 1† | - |
90Y4273 | A2MC | ServeRAID M5100 Series Performance Accelerator for IBM System x | 1† | - |
90Y4318 | A2MD | ServeRAID M5100 Series SSD Caching Enabler for IBM System x | 1† | - |
46M0912 | 3876 | IBM 6Gb Performance Optimized HBA | 1 | - |
46C8988 | A3MW | N2115 SAS/SATA HBA for IBM System x | 1 | - |
# The ServeRAID C105 is an onboard software RAID controller.
§ An FoD upgrade for ServeRAID C105 that supports eight SATA HDDs.
* The ServeRAID M5100 Series Battery Kit (81Y4508) is only supported with ServeRAID M5100 Series 512MB Cache/RAID 5 Upgrade (81Y4484).
† The ServeRAID M5100 Series RAID 6 Upgrade (81Y4546), Performance Accelerator (90Y4273), and Caching Enabler (90Y4318) require RAID 5 Upgrade with caches (81Y4484, 81Y4487, or 81Y4559).
The internal hardware RAID controller is installed into a dedicated PCIe slot (slot 3 for models with 14 drive bays or slot 5 for models with up to 12 drive bays). See Table 12 and Table 13 (PCI riser card options) for more details.
The following table lists drive types and internal drive bay configurations supported by the RAID controllers (SAS HDDs include both SAS and NL SAS HDDs, and SATA HDDs include both SATA and NL SATA HDDs).
Table 9. Drive types and internal drive bay configurations supported by the RAID controllers
<
RAID controller | Drive type | 8x 3.5-in. hot-swap |
12x 3.5-in. hot-swap |
14x 3.5-in. hot-swap |
4x 3.5-in. simple-swap |
8x 3.5-in. simple-swap |
ServeRAID C105 | SAS HDD | No support | No support | No support | No support | No support |
SATA HDD | Yes* | No support | No support< |